DIGITAL GAUGE(INCREMENTAL)

- Measuring range(MR): 5 mm

- Maximum resolution(Res): 0.1 µm, 0.5 μm

- Accuracy(Acc): 1 µm p-p to 1.5 µm p-p (Depends on the model)

- Maximum response speed: 80 m/min (resolution 0.1 µm), 250 m/min (resolution 0.5 µm)

- Bearing structure: Improved sliding performance through the use of highly durable ball spline bearings

- High durability: 320 million sliding cycles or more (under continuous evaluation as of January 2021)

- Protection grade: IP67 (straight type / right angle type with air tube)

- Built-in reference point

- Output signal: A/B/reference point (Voltage-differential line driver output)

- Flange type is also available for strong fixing.

제품 사양

Model	High resolution model	General purpose resolution model
	DK805SAR, DK805SALR, DK805SAFR, DK805SAFLR, DK805SBR, DK805SBLR, DK805SBFR, DK805SBFLR	DK805SAR5, DK805SALR5, DK805SAFR5, DK805SAFLR5, DK805SBR5, DK805SBLR5, DK805SBFR5, DK805SBFLR5
Measuring range	5 mm
Maximum resolution	0.1 µm	0.5 µm
Accuracy(at 20℃)	1 µm p-p	1.5 µm p-p
Measuring force (at 20℃)	Upward: 0.35 ±0.25 N
	Horizontal: 0.40 ±0.25 N
	Downward: 0.45 ±0.25 N
Operating temperature	0 to +50 °C (no condensation)
Storage temperature	-20 to +60 °C (90 %RH or less)
Maximum response speed *1	80 m/min (42 m/min)	250 m/min (100 m/min)
Spindle driving	Spring push (All model)
	Air drive by vacuum suction is possible (DK805SLR)
Reference point response speed	Same as maximum response speed noted above
Reference point	at 1 mm ±0.5 mm position of spindle movement
Protection grade *2	Straight type: IP67 / Right angle type: IP64 (IP67*3 )
Vibration resistance	100 m/s2 (20 to 2,000 Hz)
Impact resistance	1,000 m/s2 (11 ms)
Power supply	DC 5 V ±5 %
Power consumption	1 W
Output	A/B/reference point, voltage-differential line driver output (conforming to EIA-422)
Mass*4	Approx. 30 g
Feeler	Carbide ball tip, mounting screw M2.5	Steel ball tip, mounting screw M2.5
Output cable length	2.5 m
Accessories	Instruction manual, +P M4 x 5 screws (2 pc), tightening nut, clamp spanner, wave washer,
	mounting pins 1 each (for DK8*SF only), hose elbow (for DK8SL* only),
	spanner, supplement

*1 Values in parentheses show those of type B.
*2 Excluding the interpolation box and connector
*3 When Φ4 mm tube is used in the right angle type
*4 Excluding interpolation box and connector
*5 There are some differences in the shape and dimensions from the previous DK800 series models.

제품 도면

DK805S Series

Extension cable

CE08-1, 3, 5, 10, 15	Extension cable for LT series / MG series (1, 3, 5, 10, 15 m)
CK-T12, 13, 14, 15, 16	Flex-resistant extension cable for LT series / MG series (1, 3, 5, 10, 15 m)